PM Shift Maintenance Technician 2-2-3
Salt Lake City, UT Salt Lake City, UT From $31 an hour From $31 an hour STARTING AT $31/HR! ARE YOU A MAINTENANCE TECHNICIAN READY TO PARTNER WITH THE BEST? DAILY'S IS HIRING FOR MAINTENANCE TECHNICIANS! $31 - UP (DOE).
SUMMARY Maintenance technician Performs mechanic skills including, but not limited to mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of various production and packaging machines.
ESSENTIAL DUTIES/RESPONSIBILITIES include, but are not limited to the following:
Able to read and interpret equipment manuals and work orders to perform required maintenance.
Provide emergency repairs on production equipment (as assigned by Dispatch, Leads, or Management) to always keep lines operational.
Use of power tools, drill press, weld, shop tools, etc.
Perform scheduled maintenance repairs of production equipment including replacement of failed components such as bearings, belts, motors, power/control lines, etc.
Diagnoses problems and replace or repair parts as needed.
Dismantle defective machines and equipment and install new or repaired parts, using specifications and/or blueprints, precision measuring instruments, and hand tools.
Adjust various types of devices and control systems.
Clean and lubricate parts as required.
Confirm that equipment is operating to production standards.
Other duties as assigned.
EDUCATION, EXPERIENCE, SKILLS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the work environment, knowledge, skill, and/or ability required or preferred.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Food or Medical plant experience is preferred.
Basic hydraulics/pneumatics experience Basic Conveyor maintenance Building and grounds maintenance experience Electrical experience (480/110/low voltage) - PLC/VFD knowledge is a plus.
Ammonia Refrigeration experience is a plus.
Able to speak, read and write in English a must.
Bilingual skills a plus - English/Spanish Able to read and follow blueprints and electrical diagrams.
Experience in performing preventative maintenance.
Experience in a fast-paced, cold, wet production environment.
Able to interface well with production line workers and supervisors.
Ability to apply mathematical concepts to practical situations preferred.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form preferred.
PHYSICAL DEMANDS Frequent need to sit, stoop, kneel, crouch, crawl, bend, push/pull, and ability to access small areas.
Able to lift 50 lbs.
on a regular basis Able to climb stairs and ladders, and work at elevated heights WORK ENVIRONMENT:
The noise level in the work environment is usually moderate but sometimes very loud.
WORK SCHEDULE:
The hours and days of work are established by departmental needs and at the discretion of management.
Must be available to work as scheduled.
Schedule is a 2-2-3, 12-hour shift per day.
Able to read and interpret equipment manuals and work orders to perform required maintenance.
Provide emergency repairs on production equipment (as assigned by Dispatch, Leads, or Management) to always keep lines operational.
Use of power tools, drill press, weld, shop tools, etc.
Perform scheduled maintenance repairs of production equipment including replacement of failed components such as bearings, belts, motors, power/control lines, etc.
Diagnoses problems and replace or repair parts as needed.
Dismantle defective machines and equipment and install new or repaired parts, using specifications and/or blueprints, precision measuring instruments, and hand tools.
Adjust various types of devices and control systems.
Clean and lubricate parts as required.
Confirm that equipment is operating to production standards.
Other duties as assigned.
Food or Medical plant experience is preferred.
Basic hydraulics/pneumatics experience Basic Conveyor maintenance Building and grounds maintenance experience Electrical experience (480/110/low voltage) - PLC/VFD knowledge is a plus.
Ammonia Refrigeration experience is a plus.
Able to speak, read and write in English a must.
Bilingual skills a plus - English/Spanish Able to read and follow blueprints and electrical diagrams.
Experience in performing preventative maintenance.
Experience in a fast-paced, cold, wet production environment.
Able to interface well with production line workers and supervisors.
Ability to apply mathematical concepts to practical situations preferred.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form preferred.
Frequent need to sit, stoop, kneel, crouch, crawl, bend, push/pull, and ability to access small areas.
Able to lift 50 lbs.
on a regular basis Able to climb stairs and ladders, and work at elevated heights.
Estimated Salary: $20 to $28 per hour based on qualifications.
SUMMARY Maintenance technician Performs mechanic skills including, but not limited to mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of various production and packaging machines.
ESSENTIAL DUTIES/RESPONSIBILITIES include, but are not limited to the following:
Able to read and interpret equipment manuals and work orders to perform required maintenance.
Provide emergency repairs on production equipment (as assigned by Dispatch, Leads, or Management) to always keep lines operational.
Use of power tools, drill press, weld, shop tools, etc.
Perform scheduled maintenance repairs of production equipment including replacement of failed components such as bearings, belts, motors, power/control lines, etc.
Diagnoses problems and replace or repair parts as needed.
Dismantle defective machines and equipment and install new or repaired parts, using specifications and/or blueprints, precision measuring instruments, and hand tools.
Adjust various types of devices and control systems.
Clean and lubricate parts as required.
Confirm that equipment is operating to production standards.
Other duties as assigned.
EDUCATION, EXPERIENCE, SKILLS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the work environment, knowledge, skill, and/or ability required or preferred.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Food or Medical plant experience is preferred.
Basic hydraulics/pneumatics experience Basic Conveyor maintenance Building and grounds maintenance experience Electrical experience (480/110/low voltage) - PLC/VFD knowledge is a plus.
Ammonia Refrigeration experience is a plus.
Able to speak, read and write in English a must.
Bilingual skills a plus - English/Spanish Able to read and follow blueprints and electrical diagrams.
Experience in performing preventative maintenance.
Experience in a fast-paced, cold, wet production environment.
Able to interface well with production line workers and supervisors.
Ability to apply mathematical concepts to practical situations preferred.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form preferred.
PHYSICAL DEMANDS Frequent need to sit, stoop, kneel, crouch, crawl, bend, push/pull, and ability to access small areas.
Able to lift 50 lbs.
on a regular basis Able to climb stairs and ladders, and work at elevated heights WORK ENVIRONMENT:
The noise level in the work environment is usually moderate but sometimes very loud.
WORK SCHEDULE:
The hours and days of work are established by departmental needs and at the discretion of management.
Must be available to work as scheduled.
Schedule is a 2-2-3, 12-hour shift per day.
Able to read and interpret equipment manuals and work orders to perform required maintenance.
Provide emergency repairs on production equipment (as assigned by Dispatch, Leads, or Management) to always keep lines operational.
Use of power tools, drill press, weld, shop tools, etc.
Perform scheduled maintenance repairs of production equipment including replacement of failed components such as bearings, belts, motors, power/control lines, etc.
Diagnoses problems and replace or repair parts as needed.
Dismantle defective machines and equipment and install new or repaired parts, using specifications and/or blueprints, precision measuring instruments, and hand tools.
Adjust various types of devices and control systems.
Clean and lubricate parts as required.
Confirm that equipment is operating to production standards.
Other duties as assigned.
Food or Medical plant experience is preferred.
Basic hydraulics/pneumatics experience Basic Conveyor maintenance Building and grounds maintenance experience Electrical experience (480/110/low voltage) - PLC/VFD knowledge is a plus.
Ammonia Refrigeration experience is a plus.
Able to speak, read and write in English a must.
Bilingual skills a plus - English/Spanish Able to read and follow blueprints and electrical diagrams.
Experience in performing preventative maintenance.
Experience in a fast-paced, cold, wet production environment.
Able to interface well with production line workers and supervisors.
Ability to apply mathematical concepts to practical situations preferred.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form preferred.
Frequent need to sit, stoop, kneel, crouch, crawl, bend, push/pull, and ability to access small areas.
Able to lift 50 lbs.
on a regular basis Able to climb stairs and ladders, and work at elevated heights.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
